send message order online

+372 62 28 220 call us for best offer

Home » Environment and gas analyzers

Fuji Electric Environment and Gas analyzers

Exhaust gas monitoring NOx converter - ZDL

The NO2/NO converter is to be coupled with a NOx gas analyzer for flue exhaust. It is using a special catalyst which efficiently converts NO2 in the sample gas to NO.

ATEX in-situ oxygen analyzers

The oxygen measurement enables the control of burner fuel/air ratios to ensure combustion efficiency and process safety. Fuji Electric O2 Analyzer is adapted to be installed in hazardous areas and to withstand critical environments.

Paramagnetic Oxygen Analyzer - ZAJ

Fast response, unaffected by combustible gas, ideal for combustion control in industrial furnaces and incinerators.

NDIR CO2 Controller

The ZFP9, non-dispersive infrared gas analyzer, is suitable for CO2 concentration measurement in the air. Air analysis is performed using a non-dispersive infrared sensor (NDIR sensor).

In-situ zirconia oxygen analyzers

This oxygen analyzer is used to continuously measure oxygen concentration in combustion exhaust gas of industrial boilers or furnaces, and is ideally suited for combustion management and control, such as garbage incinerators and smallest to largest sized boilers, as combustion controllers, achieving a significant energy-saving effect.

Cross Stack Laser Gas TDL Analyzer - ZSS

This gas analyzer can be used under high dust conditions. It is possible to install upstream of the bagfilter where gas sampling is normally difficult.

Infrared gas analyzers ZRE ZKJ ZPA ZPB ZPG

The range of Fuji Electric multi-gas extractive analyzers consists of non-dispersive infrared gas analyzers.

ZFDM-4 Dust Monitor

The Fuji Dust Monitor ensures the continuous monitoring of dust emission at stack and after bag filter monitoring. It applies to all industries with dust.

Hydrogen Analyzers Thermal Conductivity Gas Analyzer - ZAF4

The analyzer continuously measures the concentration of gases such as H2, He, and Ar with high stability.

Flue gas humidity meter - DELTA O2

All-in-one system : one single flange mounted on the stack. It measures wet O2, dry O2 and H2O (en option) concentrations.

Fuji ZMV Microventuri flue gas flowmeter

Fuji Electric France designed, manufactures and sells flue gas monitor for Continuous Emission Monitoring Systems (CEMS) applications.

Portable NDIR analyzer & sample conditioning system - ZSVS / ZSVF

The compact type gas analyzer ZSVF is composed of an analyzing block (infrared sensor and oxygen sensor) and a sampling block (filters, sample pump, Peltier cooler, NOx converter, automatic calibration solenoid valves, condensate automatic discharge, flowmeters, etc.).

Fuji CEMS Software Suite

The Fuji CEMS gas analysis systems allow the continuous monitoring of gas emissions in flue gases from natural gas, fuel, coal, industrial or urban waste combustion.

S-Keeper 7TM

S-Keeper 7™ is a high-end extractive gas analyser for on-board continuous emission monitoring. It is fully IMO compliant; it has been certified according to RINA Rules, Pt. C, Ch 3, Sec 6; Lloyd’s Register Test Spec. 1; DNV Standard for Certification 2.4; and ClassNK.

Modular analysis system for on-board continuous emissions monitoring

Monitoring exhaust gas emissions is crucial to demonstrating compliance with MARPOL Annex VI regulations on sulphur emissions.

ZPAF Biogas Analyzer & ZPSB Biogas Analysis System

High-stability and ease-of-maintenance incorporated in a space-saving design. Biogas is a mixture of methane and carbon dioxide with a few other components. It is used for the production of heat, electricity or biofuel.

Portable Neutron Survey Meter NSN3

The NSN3’s detection principles gas counter consists of an organic gas mixture of methane and nitrogen gas (the neutrons are measured using this mixed gas).

Electronic Personal Dosimeter NRF50

Fuji Electric’s NRF50 Electronic Personal Dosimeter takes worker safety to a whole new level, surpassing industry guidelines for real-time monitoring. Retro-fittable into existing systems, this device uses Wi-Fi or existing radio remote monitoring systems.

Fuji Electric, Gas analyzers

Fuji Electric developed the first infrared gas analyzer in Japan to use mass-flow sensors. Since then, Fuji Electric has supplied customers with various types of gas analyzers to support environmental preservation and control efforts. These efforts include measurements of atmospheric pollution and detection of low density of SOx and NOx, generated by incinerating facilities and boilers. FUJI's gas analyzer are commonly used to monitor the atmosphere to help maintain a cleaner natural environment.